The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support ExtremePSI
Please Support ExtremePSI

Intro

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Gabriel042916

Probationary Member
4
3
Sep 17, 2022
Ignacio, Colorado
hello everyone, new to the forum. I own a 97 eclipse gst spyder 5spd. Has 20k miles on the motor , 115k on the dash. This is my 1st dsm and im enjoying it. Planning to do some small mods to it, not looking for any crazy power 400hp if that. Currently has greddy big fmic, catch can, tubular manifold and some small cosmetic work. Im looking for all of the greddy parts that bolt on to the 2g.

You must be logged in to view this image or video.


You must be logged in to view this image or video.


You must be logged in to view this image or video.
 
Welcome! Be sure to check the Resources category for help with your plans. There are plenty of members here who have traveled the same path that have documented their builds and shared what they learned.

Look forward to seeing your progress.
 
Welcome! Be sure to check the Resources category for help with your plans. There are plenty of members here who have traveled the same path that have documented their builds and shared what they learned.

Look forward to seeing your progress.
Thank you im currently looking for a greddy 18g or 20g , as well has a greddy exhaust system. I do have plans to run ecmlink and upgrade to a 255 fuel pump ,afpr, and larger injectors
 
Welcome to the site, your manifold is missing 2 bolts to hold the turbo up, probably making alot of noise and very little boost

I definitely reccomend trying to find a stock exhaust manifold, those tubular ones have really bad problems warping at the flange where it mounts to the turbo
 
Welcome to the site, your manifold is missing 2 bolts to hold the turbo up, probably making alot of noise and very little boost

I definitely reccomend trying to find a stock exhaust manifold, those tubular ones have really bad problems warping at the flange where it mounts to the turbo
Lol thanks , picture was when i was installing it and needed new hardware. It is completely bolted on and doesn't leak and hasnt cracked but i do plan to upgrade to a better tubular. My stock manifold was cracked and had this one and it works for the moment but thank you
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top