The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support STM Tuned
Please Support STM Tuned

2G Black wires to ECU are taped off .. Where do they go

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Yyou2

Probationary Member
4
0
Jun 10, 2022
Alpaugh, California
The black wires that go to ecu are all pulled out and taped off. Where do they go?
 
Last edited by a moderator:
Car is a 95 eclipse turbo. I just got the car it will run with starting fluid . This what I I'm deal with with wires the black wires are like spilsed to the green a white wire and some into white wire

You must be logged in to view this image or video.


You must be logged in to view this image or video.
 
Your best bet is likely to get a factory manual for your year car and start chasing wiring colors. That's going to take some time to undo. The factory manual will have every wiring diagram for every connector and wire colors assuming nothing has been so hacked you can no longer tell.
 
The wire that is spilced where the fuel rail is goes too the passenger side foot well then one wire goes to the back of the car . The wires on the ecu should the black ones be grounded to the body of the car. The car won't run only fires if I use starting fluid..

You must be logged in to view this image or video.


You must be logged in to view this image or video.


You must be logged in to view this image or video.


You must be logged in to view this image or video.


You must be logged in to view this image or video.


You must be logged in to view this image or video.


You must be logged in to view this image or video.


You must be logged in to view this image or video.


You must be logged in to view this image or video.


You must be logged in to view this image or video.


You must be logged in to view this image or video.
 
The wires that were spilced into the ecu I cut some tyep of harness . The other harness goes to something under the air filter. . sorry I just resently got this car it's all new too me.
 
Do not just go grounding wires randomly. I see vampire taps etc. You're going to have to go chase this stuff and get a diagram. I won't sugar coat it. This looks to be difficult and time consuming.
You need wiring diagrams. Get the factory manual.
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top