The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support Kiggly Racing
Please Support Fuel Injector Clinic

Resolved 90 ofh banjo bolt torque

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

rb25det510

15+ Year Contributor
109
2
Nov 3, 2005
lake zurich, Illinois
Am I correct thinking that the torque spec for the banjo bolt fitting for the cooler lines on a 90 ofh is 29-36 ft/lbs?
You must be logged in to view this image or video.
You must be logged in to view this image or video.
 
Solution
Where says "Eye bolt" is the one for the oil cooler banjo bolt. In the pic, it shows 29-33 ft-lbs.
You must be logged in to view this image or video.
Where says "Eye bolt" is the one for the oil cooler banjo bolt. In the pic, it shows 29-33 ft-lbs.
You must be logged in to view this image or video.
Right on, it's pretty much what I figured. I just wanted to double check/make sure. Not to easy to find these housings nowadays. Thank you sir!
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top