The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support Rix Racing
Please Support Morrison Fabrication

1G Rear Calipers bolts? And handbrake problem

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Lancer_lover

Proven Member
165
32
Apr 18, 2017
kristianstad, Europe
Hi! I need good pictures on rear brake calipers bolts and wich side ( up or down) the guide pin sitting?
And can i buy new ones or anyone selling them?
You must be logged in to view this image or video.
 
I don't have any pictures of the orientation..... but have you looked at Rockauto to see if they have the bolts in stock?
 
I could try to crawl under my car and get a photo, but I have AWD and yours is FWD, and I don't think the rear calipers are quite the same. I was able to find parts listed for FWD rear caliper bolts on Parts Geek. They seem to come as a matched pair. There is a chance they come with instructions. They don't cost much, so worth a shot?
 
The guide pin the the upper one on both sides, the lock pin is the lower.
The guide pin is the one with the thicker shank.

In this picture the lock pin it at the top of the picture and the guide at the bottom of the picture . On the car this is a left caliper and like I said the guide pin is on the top

pins-jpg.106523


Here's the carrier installed but the caliper isn't yet. You can see the guide pin on the top.

You must be logged in to view this image or video.
 
Last edited:
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top