The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support ExtremePSI
Please Support Fuel Injector Clinic

2G Front mount

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Punishment Racing is the only vendor I know that still makes a complete kit. PR 2g FMIC Kit

If you need something that performs a bit better, I suggest getting a ETS 2g core and then contacting Archer Fab for the piping since it's a replica of the ETS kits piping that was discontinued.

AF 2g short route piping
ETS FMIC Cores

 
Punishment Racing is the only vendor I know that still makes a complete kit. PR 2g FMIC Kit

If you need something that performs a bit better, I suggest getting a ETS 2g core and then contacting Archer Fab for the piping since it's a replica of the ETS kits piping that was discontinued.

AF 2g short route piping
ETS FMIC Cores
Much help thank you !

Punishment Racing is the only vendor I know that still makes a complete kit. PR 2g FMIC Kit

If you need something that performs a bit better, I suggest getting a ETS 2g core and then contacting Archer Fab for the piping since it's a replica of the ETS kits piping that was discontinued.

AF 2g short route piping
ETS FMIC Cores
Unfortunately I have to automatic gsx 🤦 LOL
 
It works with A/T cars, you'll just have to relocate the transmission cooler which would be the case with any short route FMIC kit unless you find an old Greddy or Hahn Race Craft kit where the hot charge pipe off the turbo enters the FMIC on the passenger side. You'll also have to relocate or purchase a different coolant overflow tank, which is the case on the 5 speed 2g as well, and be prepared to make a few other unexpected changes along the way depending on your specific setup.

My car used to be an A/T, here's a post I made about installing a short route kit where you can see the A/T cooler bracket is in the way. I believe most A/T guys relocate the cooler to the stock SMIC location.


Screen shot below...
You must be logged in to view this image or video.
 
It works with A/T cars, you'll just have to relocate the transmission cooler which would be the case with any short route FMIC kit unless you find an old Greddy or Hahn Race Craft kit where the hot charge pipe off the turbo enters the FMIC on the passenger side. You'll also have to relocate or purchase a different coolant overflow tank, which is the case on the 5 speed 2g as well, and be prepared to make a few other unexpected changes along the way depending on your specific setup.

My car used to be an A/T, here's a post I made about installing a short route kit where you can see the A/T cooler bracket is in the way. I believe most A/T guys relocate the cooler to the stock SMIC location.


Screen shot below...
You must be logged in to view this image or video.
Your the man brother thank you
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top