The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support JNZ Tuning
Please Support Morrison Fabrication

ECMlink need dead times for FIC 1100cc hi-z

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

dustyboner

DSM Wiseman
1,946
1,083
Mar 13, 2016
abq, New_Mexico
I need the voltage comp. and global dead times (@43.5psi) for FIC 1100 hi-Z injectors. If somebody could hook me up that would be awesome. The cars owner threw away the data sheet he got from FIC and i haven't been able to locate the info anywhere online.

Thanks
 
Man........will a FIC 1120 data sheet work for ya?
I have that but not just 1100's. I am going to use them for my FIC 1200's as a start.
Marty
Edit: sorry, I just noticed that they are LowZ
Dam. I think we all should post up our Data sheets on here for all to be able to start out with.
I have FIC 2150, 1650, 1120 and Bosh 2200 info and thought I had them posted up somewhere on here. Haven't found it yet though.
You must be logged in to view this image or video.
 
When i got my 1100CC i was then told they now list them as 1200 but its actually more like 1080cc so not sure on the 1200 part and how they figure that out? Anyway here is what FIC sent me as a generic flow chart
 

Attachments

  • 1200H 4 cylinder TRI flow sheet v2.pdf
    268.1 KB · Views: 34
Last edited:
Man........will a FIC 1120 data sheet work for ya?
I have that but not just 1100's. I am going to use them for my FIC 1200's as a start.
Marty
thanks
The first place i looked was your posts in the tech articles.

It would be nice if ECMtuning updated the baseinjectordata part of the wiki (so would logging cam and crank sensor with link):toobad:

I'll scrape the site and see if i can find any other data sheets and post them in the tech articles.

When i got my 1100CC i was then told they now list them as 1200 but its actually more like 1080cc so not sure onnthe 1200 part and hoe they figure that out? Anyway here is what FIC sent me as a generic flow chart
thanks
thats perfect

You must be logged in to view this image or video.
 
Weird. When I sent my injectors to FIC they didn't send me back a sheet with the Injector voltage offset, just showed the Data Match Tech section and estimated WHP.
 
You don't get the tech data on a cleaning, only on a new set, which is why I started a new thread so maybe we could collect a few more.
By the way, thanks Bobby I posted yours in that thread too!
 
so the data sheet has 8v and 10v
but link has 7v and 9v
so is there some way to figure what values i need to enter? or do i just split the difference and use 2.56?

You must be logged in to view this image or video.
You must be logged in to view this image or video.
 
so the data sheet has 8v and 10v
but link has 7v and 9v
so is there some way to figure what values i need to enter? or do i just split the difference and use 2.56?

You must be logged in to view this image or video.
You must be logged in to view this image or video.
I always split the difference and it has worked out great.
Like 2560 Usecs for 9 volts as you have done. I don't know why they include 7 volts because my car won't run on that. :banghead:
 
just to jump in on this @dustyboner my setup is currently logged and global is setup and its saying the flow CC is actually 1055cc! so not sure why so why they sell them as a 1200 now i dont know! 1055 is more closer to the original 1100cc listed so no idea why the big jump in listing. let me know what your global ends up like
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top