The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support ExtremePSI
Please Support Fuel Injector Clinic

2G Favorite 20g Turbo?

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Yes. It is almost unrecognizable as anything other than a 14b. It was the "big" turbo I ran before I started playing with Holsets.
 
Boy if I do, it is way back. It was a TD05 case that Jus put together for me so it would look stock. I was outrunning Challenger Scat Packs with it.
 
The 20G is a versatile slut. From the quick spool of a cast compressor and TD05H turbine to 52 lb/min from a billet compressor and a TD06H turbine at 33-34psi, there's no way to possibly pick just any configuration.
 
Any idea where to find one? It's not that I'm not finding them necessarily, it's just hard figuring out which companies to trust. It seems a lot of good parts, especially kits, have been discontinued. I keep finding either Ebay parts or sky-high overpriced parts. It's crazy 😆

So basically, I need a 20g Turbo Kit. TD05 I guess?
 
Any idea where to find one? It's not that I'm not finding them necessarily, it's just hard figuring out which companies to trust. It seems a lot of good parts, especially kits, have been discontinued. I keep finding either Ebay parts or sky-high overpriced parts. It's crazy 😆

So basically, I need a 20g Turbo Kit. TD05 I guess?
The guy above your post is who I'd have do the work.
 
Also, I could use some more education while we're at it. Can I order hot parts with the turbo? I need all the hot parts and cold parts, and I'm pretty sure I've got the cold side covered with Punishment Racing.
 
Jus Turbos (@JusMX141 ) creates his very own 20g. He builds and services all of them that he builds and I wouldn't trust anyone other than him. He has ALL of my business and always will. Trust him, he built my 20g and I loved it.
Here is a comment to give you an idea of who he is and what he does (which is all turbo's).
Marty
 
Yep, send him a private message or hit him up on his contact us page. Justin is a good man.
 
Oh now, don't get him hooked on a oversized hair dryer...........:p
Although you point out what I did. I went from the 14 to a 20 then to the Holsets. The 20 would come in sooner than the Holset but if you run the TS manifold, that 35 will hum.
 
Oh now, don't get him hooked on a oversized hair dryer...........:p
Although you point out what I did. I went from the 14 to a 20 then to the Holsets. The 20 would come in sooner than the Holset but if you run the TS manifold, that 35 will hum.

Now you are introducing an $1100 manifold to run the Holset. The whole point of running a bolt on 20g is mostly cost savings
 
Yes that was the point. A 20g should be pretty easy on the wallet. I would guess at or under $500. Its been a few years since I ran one.
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top