The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support ExtremePSI
Please Support STM Tuned

MHI/FP Turbo Oil Drain Kit

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

MorrisonFab

Supporting Vendor
314
1,069
May 28, 2017
Johnson Creek, Wisconsin
Full flow 5/8" drain kit for 14b/16g/FP bolt-on turbos where the factory drain doesn't quite work or if you would rather slide a hose off during turbo removal instead of dealing with gaskets.
Each fitting is slightly angled toward each other for an easier bend with the high temp hose and the oil pan fitting is angled upwards to promote more oil drainage out of the line.
Includes the fittings, pre-trimmed hose, clamps, turbo bolts, and self sealing oil pan bolts with o-rings under the bolt heads.
We sneakily added 5/8" drain kits recently to cover basically all DSM and Evo turbo drain options and we were really happy to see this work out so well.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

You must be logged in to view this image or video.


$99 plus shipping
You must be logged in to view this image or video.



A big thank you to John Hanlon at DSMotorsport for the test fitting, feedback, and constant support!
 
Thank you @MorrisonFab ! What a nice part that has been needed for a while!
Here is a big ole Pat on the Back!!! :thumb:
Marty
 
I've read a lot of threads in regards to oil leaks with the return line where the flange meets the oil pan. Apparently the biggest cause of these are the lack of crush washers being used on the bolts at the pan flange. ExtremePSI sells them for $12.xx each. Your kit doesn't mention or include any washers. Are you recommending we don't need them or just simply not including them?

*Edit* - in your pic of the kit, it appears to be an o-ring on one of the pan bolts, but not the other. Is that what you are using to help seal the flange at the oil pan?
 
I've read a lot of threads in regards to oil leaks with the return line where the flange meets the oil pan. Apparently the biggest cause of these are the lack of crush washers being used on the bolts at the pan flange. ExtremePSI sells them for $12.xx each. Your kit doesn't mention or include any washers. Are you recommending we don't need them or just simply not including them?

*Edit* - in your pic of the kit, it appears to be an o-ring on one of the pan bolts, but not the other. Is that what you are using to help seal the flange at the oil pan?
All of our drain kits include self sealing oil pan bolts with o-rings under the bolt heads :)
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top