The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support Morrison Fabrications
Please Support Fuel Injector Clinic

3G Sway bar size

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Well OEM front bushing is MR589816 but doesn't say in ASA, and the rear bushing is MR272717 (looks like 19mm). You will need to measure to see if it is 16mm, 18mm or 19mm for the front sway bar. The front is likely 16mm being the Spyder, but you should measure first. Or simply ask the question on the proper forum - https://www.club3g.com/

Energy Suspension 16mm bushing - 5.5151R
 
Last edited:
Or simply ask the question on the proper forum - https://www.club3g.com/
I checked out that forum recently and it doesn't look like anyone posts there anymore now that they have new ownership - maybe it died off before that, I don't know. Tim, you probably offered up more help than he'll ever get over there. Thanks for sharing what you found.
 
Yeah I was looking on that forum and it looked pretty darn quiet.

As for the measuring, being that there are 3 variations, it would be definitely wise to check before ordering.

Good luck!

TMZ
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top