Cruciatus111
Proven Member
- 50
- 6
- Oct 10, 2013
-
Honolulu,
Hawaii
Hey guys, I recently installed fender flares on my car but I managed to hit my wiring harness in the driver side fender area with my drill and now I have some weird electrical problems. (pics down below). My car is a 98 gst automatic. Now my headlights and horn turn on when I open my door. My interior lights, radio, and powered door locks don't have power to them. I found the damaged wires and repaired them, but the issues didn't go away. I looked through all of the fuses and relays and none of them are fine. All of the other electronics seem to work fine.
When I unwrapped the harness I damaged the three wires I am holding which are the large white/black stripe, red w/white stripe, and yellow w/ red stripe. I looked through a diagram and saw that this wire connects to a "Combination meter" but I have no idea what that is. Is there anything that I should be look at? and Is there any module/box under the dash that I should be taking a look at?
Thanks for any input,
When I unwrapped the harness I damaged the three wires I am holding which are the large white/black stripe, red w/white stripe, and yellow w/ red stripe. I looked through a diagram and saw that this wire connects to a "Combination meter" but I have no idea what that is. Is there anything that I should be look at? and Is there any module/box under the dash that I should be taking a look at?
Thanks for any input,