The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support JNZ Tuning
Please Support Morrison Fabrication

1g manual to auto swap

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

NOSLO2PT0

20+ Year Contributor
2,686
244
Aug 31, 2002
Joliet, Illinois
Is there a link I’m not seeing that has a full rundown of parts needed to do an auto swap on a 1g?

I just picked up an auto drivetrain (trans/tcase/rear diff and axles). What else am I gonna need?
 
Shifter, shifter cable, flexplate, converter, and some way of controlling the trans (shift box (easiest), or tcu). And I would swap the pedals also and use the auto mounts.
 
I believe the turbo tcu has different shift points than the non-turbo.
I would honestly go with a shift box. Ive had great luck with the forced four boxes personally.
 
No, with the smart 100 you can set your own shift points and a lot of other features. I believe the smart 50 will let you do the same, but with a few less features than the 100. Check out their website and you can compare the boxes.
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top