- Thread starter
- #51
jpmxrider489
10+ Year Contributor
- 2,411
- 146
- Apr 4, 2010
-
pittsburgh,
Pennsylvania
uh, what?
With my boost controller turned off in dsmlink. I would only run wastegate pressure for boost, which is 17psi.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
uh, what?
With my boost controller turned off in dsmlink. I would only run wastegate pressure for boost, which is 17psi.
you are FWD? I assume you are having traction issues? It wont estimate HP and TQ anywhere close while you dont have traction. Is that maybe your issue?
Car was little lean on that pull, Your almost out of injector. The lb/min looks correct for the boost it was at.
Lean Adjust your SD table and you lb/min will be much better. Still dropping off in boost up top a little too. But i bet with SD table changes the car is really in the low 50lb/min range.
Honestly the logs you posted with new housing have made me think your SD table needs a rework.Yep, also notice that. I guess that's the difference between 3rd and 4th gear.