The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support Morrison Fabrications
Please Support ExtremePSI

2G Turbo feed line fittings.

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

John Miller

Proven Member
172
67
Jan 27, 2020
Watertown, Wisconsin
Hello my fellow DSM addicts!

I have a quick question that I'm hoping someone can answer. The car in question is a 1997 eclipse gs-t with the stock t25 turbo. I've been trying to source a turbo feed line, but I've decided to have a machine shop make a hydraulic line. My question is what are the exact fittings I need for the feed line? I need the fitting that taps into the OFH and the turbo itself. If I could get the exact fitting numbers that would be great. Thank you!
 
3/8" BSP 90* to 4AN at the filter housing, 4AN to 1/4" tube (7/16" x 24) straight (180*) at the turbo. You'll need a .070" restrictor in the line to prevent over-oiling the turbo.
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top