Hi guys. I finally found a nice set of 2gb sideskirts to throw on my 95 gsx (technically a talon the last owner converted to a 2gb eclipse). The car has all the mounting holes in the doors and body but I have none of the mounting hardware.

Does anyone have a link for 3rd party mounting clips that they've used and worked well? The OEM ones are $2-3 a pop. It looks like I would need a lot and the clips would cost as much as I paid for the skirts..

For the small front sideskirt piece, what does the bolt in the wheel well screw into? My fenders have a mounting hole but it doesn't look like it's threaded or anything. I supposed I could just buy a short bolt and nut.

Do you need to use any mounting tape on any of the pieces or will good quality clips and screws pretty much hold everything in place?

Thanks in advance!

@99 OZ Edition has a video on it, he mentions a couple times the OEM clips are worth the price, although you can find them on eBay.

He mentions the clips at 1:15 and 3:11

mcubed45 said:

Hi guys. I finally found a nice set of 2gb sideskirts to throw on my 95 gsx (technically a talon the last owner converted to a 2gb eclipse). The car has all the mounting holes in the doors and body but I have none of the mounting hardware.

Does anyone have a link for 3rd party mounting clips that they've used and worked well? The OEM ones are $2-3 a pop. It looks like I would need a lot and the clips would cost as much as I paid for the skirts..

For the small front sideskirt piece, what does the bolt in the wheel well screw into? My fenders have a mounting hole but it doesn't look like it's threaded or anything. I supposed I could just buy a short bolt and nut.

Do you need to use any mounting tape on any of the pieces or will good quality clips and screws pretty much hold everything in place?

Thanks in advance!

Click to expand...

Go to clipsandfasteners.com. They have them cheaper, and they are good quality, I've used them.

^^ That's the link I was gonna post^^^ Can't go wrong with them.

1999RSfwd said:

Go to clipsandfasteners.com. They have them cheaper, and they are good quality, I've used them.

Click to expand...

Is it the same fastener (MB696120) for all the mounting points on the sideskirt pieces?

https://www.clipsandfasteners.com/Mitsubishi-Moulding-Trim-Retainer-11mm-Stm-Lgth-p/a19320.htm

On STM they list MB696120 as a part for 63976B and 63976D but there's also a 63974B, 63974C, & 63976C in the parts diagram
https://stmtuned.com/products/mitsubishi-side-skirt-clip-2g-dsm

Can anyone tell me where the front piece bolts to?