The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support Kiggly Racing
Please Support ExtremePSI

Resolved 1g Engine bay fuse box

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

AWD-Tony

Proven Member
6,801
3,735
Sep 11, 2017
Cincinnati, Ohio
I’m in the process of removing everything from the engine bay so I can paint it. I pulled the harness through the drivers side but obviously I can’t pull the fuse box through the hole. I’ve been looking at the back of the fuse box for a minute but not sure if it’s easier to disconnect everything from behind. What are my options here?

You must be logged in to view this image or video.
You must be logged in to view this image or video.


Well it looks like I have to depin every wire in the fuse box
 
I've always pulled it. However, I'm pretty certain I've read on here that it doesn't have to come out, but I've never done it myself. Makes sense that it could, I've just never had to try.

wire harness removal
Engine harness removal questions
1g engine harness removal

Seems like I can get the harness out without taking the dash out. I’ll give it a shot. Thanks Brian!!

It runs directly to the ecu and most likely the center console. I have inputs wired to ecu so I won’t be pulling the harness out :ohdamn:

You must be logged in to view this image or video.
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top