007jimmy
10+ Year Contributor
- 1,617
- 196
- Feb 27, 2012
-
Levittown,
Pennsylvania
I recently bought a 2g engine bay fusebox/harness and sent it out to ohmracing for the “fusebox tuck” option. I received it back and it’s super nice!!! The box had all the fuses/relays when I sent it out and it came back missing Some fuses/relays (see picture) I personally didn’t remove anything from the box when I sent it out, just cut the wires off like they asked. I put power to the 40a fuse (red circle) like the stock configuration. 4g wire straight to a fully charged battery. My door chime, windows, power locks, blower motor and turn signals will not turn on. Headlights/hi-beam, brake lights, dash lights, sunroof and radio work fine. Do I need to have the 100a fuse (missing in picture, white question mark) back in there and put power to it? I will be running a 1 wire Saturn alt so I didn’t think I needed to use the fusebox since it will have its own inline 100a fuseable link. I don’t remember anything going to the 60a fuse (black question mark) in the top left of the box. Everything else is plugged in. Fuses look good. Am I missing something here?
Engine is not in the car currently so there is no alternator currently and everything worked fine before the fusebox tuck. I just wanted to make sure I had the harness installed properly /working before I put the engine in.
Engine is not in the car currently so there is no alternator currently and everything worked fine before the fusebox tuck. I just wanted to make sure I had the harness installed properly /working before I put the engine in.
You must be logged in to view this image or video.