The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support Fuel Injector Clinic
Please Support ExtremePSI

2G chassis brace

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

These are the measurements--depth 1 7/8--width 5 5/8--length 42 1/2.
For the price I dont think they can be beat.
Brandon look at your floorboard they are probably raised the same amount as the bottom.
This is a great add on as our cars are weak in this area.
Mandy
 
How did we go from bottom of car to the top?
If you really want to tighten the car, the first add on I would get are the fender braces made by a member here, "greengoblin", but you have to get them as soon as he starts making them as they go pretty fast.
I dont have them on mine as I go from the inside tied to the roll cage.
Mandy
 
How did we go from bottom of car to the top?
If you really want to tighten the car, the first add on I would get are the fender braces made by a member here, "greengoblin", but you have to get them as soon as he starts making them as they go pretty fast.
I dont have them on mine as I go from the inside tied to the roll cage.
Mandy
sent him a pm thanks man, tbh i want the fender braces and chassis braces. i already have dc from and rear strut bars and front and rear sway bars. i wanna go all out on my gsx, make her a 500 wheel track monster
 
Interested if anyone has run the Miata chassis rails? Every time I'm under my car I cringe at my rails and how beat up they are from the dumb crap I did as a kid. I road-race a Miata and a lot of the guys use those rails with good results. Whenever I see them on a Miata I think I have to see if anyone makes any specifically for our car but always forget by the time I'm in DSM mode.

I'm sure they're not quite as beneficial on the DSM as the Miata (at least we have a roof - well, some of us do), but I figure they can't hurt - specifically for those of us who have done some sick rail-slides across curbs in their younger days.:ohdamn:
 
Last edited:
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top