Stock Block Record

1cleangsx · Jun 7, 2020

Anybody else see this?

You must be logged in to view this image or video.

OSTAR had a good run :hellyeah:

It would be cool however to see a build sheet/proof tear down to back it up as OSTAR willingly submitted do to all the skeptics LOL

19Eclipse90 · Jun 8, 2020

It was brought up, but I think this is the first time the video has been posted: Lets get it clear. What are the stock block record rules.

1qkfwd said:
So the stock block record was again recently reset. Hopefully Eric chimes in.

1990TSIAWDTALON · Jun 8, 2020

I knew someone was within .02 seconds of it last week but hadn't broke it yet. I don't know who it was but maybe it was him.

Sniffbooger · Jun 8, 2020

Man those AWD really stick! I'm jealous

Blue90DEW · Jun 8, 2020

Thats my car. I have plans to use a bore scope to get pictures in the cylinders and through the drain pull hole. Ive also got some pics of the bottom end last time the cylinder head was off. At this time im fixing some issues with the car and taking it to kevin jewers dyno to see what it makes power wise and then attempting to knock the record down alittle more and also race it at kevins event in september.

1cleangsx · Jun 8, 2020

Very impressive car :thumb:

Sounds like an auto? I would love to see a build sheet

Blue90DEW · Jun 8, 2020

Thanks. Once I figure out how to use the forums again I plan on making a vehicle profile/build sheet. Yes the car is auto.

1qkfwd · Jun 9, 2020

Blue90DEW said:
Thanks. Once I figure out how to use the forums again I plan on making a vehicle profile/build sheet. Yes the car is auto.

Again, congrats man. You’ve earned it for sure.

1990TSIAWDTALON · Jun 9, 2020

Blue90DEW said:
Thats my car. I have plans to use a bore scope to get pictures in the cylinders and through the drain pull hole. Ive also got some pics of the bottom end last time the cylinder head was off. At this time im fixing some issues with the car and taking it to kevin jewers dyno to see what it makes power wise and then attempting to knock the record down alittle more and also race it at kevins event in september.

Keven told me about the car but didn't ever talk names. Good job! Were you on his dyno til 3am in the morning a few days?

You are taking up my tune time man.......just kidding. I knew he was busy. :thumb:

Congratulations are in order! Glad you found that extra .02 tenths (or more)!
Marty

Blue90DEW · Jun 10, 2020

1990TSIAWDTALON said:
Keven told me about the car but didn't ever talk names. Good job! Were you on his dyno til 3am in the morning a few days? You are taking up my tune time man.......just kidding. I knew he was busy.
Congratulations are in order! Glad you found that extra .02 tenths (or more)!
Marty

Thanks but I think that was the cobra stuck on his dyno til 3am

. Hoping to get there soon and see what my cars making.

Sniffbooger · Jun 10, 2020

I'm guessing 800+ horsies

jed344 · Jun 10, 2020

That's a serious trap speed. Should be making 700+.

frosh29 · Jul 15, 2020

So that 700 on a stock block... Does that mean oem internals only?

Blue90DEW · Jul 15, 2020

frosh29 said:
So that 700 on a stock block... Does that mean oem internals only?

Yes... stock block essentially means stock bottom end in the dsm world.

CrackedDSM · Jul 15, 2020

Freakin' amazing. I love how far auto DSMs have come. To think, back in the day people would sell these trans for $100 because they thought they were weak and couldn't hold more than stock power. I remember people being super convinced that a 16G setup would be too much or at least right on the edge.

Now you can't find an auto trans at all and if you do it's like $1500+ minimum.

Blue90DEW · Oct 15, 2020

You must be logged in to view this image or video.

I knocked that number down alittle more. Going back this weekend to see if the cooler air helps at all.

killab443 · Oct 16, 2020

Blue90DEW said:
You must be logged in to view this image or video.

I knocked that number down alittle more. Going back this weekend to see if the cooler air helps at all.

So strange that I was looking at stock block records today and came across this post. Awesome work!

NOSLO2PT0 · Oct 16, 2020

Good God! Makes me wonder why I’m building a bottom end at all. Oh yeah. Cuz I don’t know how to tune!! Good job, dude. Congrats!

The Top DSM Community on the Web

Stock Block Record

1cleangsx

19Eclipse90

1990TSIAWDTALON

Sniffbooger

Blue90DEW

1cleangsx

Blue90DEW

1qkfwd

1990TSIAWDTALON

Blue90DEW

Sniffbooger

jed344

frosh29

Blue90DEW

CrackedDSM

Blue90DEW

killab443

NOSLO2PT0

Similar threads

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds