Mikealj
15+ Year Contributor
- 30
- 13
- Sep 17, 2004
-
Firestone,
Colorado
I recently purchased a 99 GSX shell that I am trying to get back on the road. The shell did not have a wire harness so I purchased one from OHM.
Here are the details:
Cruise Control has been removed
The car starts with the clutch switch plugged in while the clutch pedal is not pushed.
A wire has been run from the black/red wire from the clutch safety switch to pin 91 on the ECU.
ECM link is not seeing the clutch switch.
Is it possible to hook the other wire going to the switch to a power source? I do not want to damage the ECU by testing it out.
Thanks in advance for any help..
Mike
Here are the details:
Cruise Control has been removed
The car starts with the clutch switch plugged in while the clutch pedal is not pushed.
A wire has been run from the black/red wire from the clutch safety switch to pin 91 on the ECU.
ECM link is not seeing the clutch switch.
Is it possible to hook the other wire going to the switch to a power source? I do not want to damage the ECU by testing it out.
Thanks in advance for any help..
Mike