The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support ExtremePSI
Please Support Rix Racing

1G ETS FMIC, Piping Route In Tight Areas

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Car Cannibal

20+ Year Contributor
532
58
Jun 7, 2003
Chicago, Illinois
Hey guys, I'm about to install a 3.5" thick ETS intercooler in my 1G that already has a FMIC in it.

Radiator Support Holes
Current piping is stock style so I have the passenger side radiator support open. The driver side looks pretty tough with the curve panel. This pretty straight forward?

JMF Header and Wastegate Dump Tube
There's not much room here with the fans and dump tube, what are you guys doing in this area, any pics?

Anyone ever run the pipes in reverse, in through passenger and out driver side?
I ask because my current set-up runs the piping in the passenger side already so the turbo outlet is setup that way.
 
I have the 8" slim fan, I guess the wastegate dump tube will need attention too but it's possible since so many have the ETS.
 
Here ya go, pretty tight even with the slims but others are doing it so I'm sure it can be stuffed in there.
 

Attachments

  • 20191213_152021.jpg
    20191213_152021.jpg
    938.3 KB · Views: 137
  • 20191213_152024.jpg
    20191213_152024.jpg
    845.1 KB · Views: 144
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top