Car Cannibal
20+ Year Contributor
- 532
- 58
- Jun 7, 2003
-
Chicago,
Illinois
Hey guys, I'm about to install a 3.5" thick ETS intercooler in my 1G that already has a FMIC in it.
Radiator Support Holes
Current piping is stock style so I have the passenger side radiator support open. The driver side looks pretty tough with the curve panel. This pretty straight forward?
JMF Header and Wastegate Dump Tube
There's not much room here with the fans and dump tube, what are you guys doing in this area, any pics?
Anyone ever run the pipes in reverse, in through passenger and out driver side?
I ask because my current set-up runs the piping in the passenger side already so the turbo outlet is setup that way.
Radiator Support Holes
Current piping is stock style so I have the passenger side radiator support open. The driver side looks pretty tough with the curve panel. This pretty straight forward?
JMF Header and Wastegate Dump Tube
There's not much room here with the fans and dump tube, what are you guys doing in this area, any pics?
Anyone ever run the pipes in reverse, in through passenger and out driver side?
I ask because my current set-up runs the piping in the passenger side already so the turbo outlet is setup that way.