The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support STM Tuned
Please Support ExtremePSI

2G Hard coolant lines?

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Atlantian

5+ Year Contributor
38
4
Jan 13, 2018
Erie, Colorado
Sorry guys been looking everywhere for an image of where the small hard coolant line bolts to on a 95/96 GSX block. Couldn't find a good image if there already is one, I do have the manual but it's very vague as to where I'm supposed to bolt it.I know where the hose ends are supposed to go & i think the upper tab bolts to the bigger water pipe but not 100% sure.If anyone has a good image or could explain where I'm supposed to bolt it up, I'd be very grateful. Thanks.
 
Yea I'm at work but I'll get one for you later. I believe I have a pic of the diagram & the part number on the pic. Ya its number 8 on the diagram!
 

Attachments

  • Screenshot_20200507-172557_Samsung Internet.jpg
    Screenshot_20200507-172557_Samsung Internet.jpg
    283.5 KB · Views: 211
I understand it's not from the block but it has 2 tabs that bolt to the block to secure it! I'm just trying to figure out where I'm supposed to bolt it on the block!

It goes from the oil cooler to the water fill housing!
 
Cool that helps for the bottom mount, thanks! Now does anyone know where the upper tab bolts to?

I actually found that pic earlier but cant find the complete pic of that hose, I suppose does it even matter where I secure it?
 
Last edited by a moderator:
Awesome actually that first thread shows where the upper tab bolts down & it's to the little bracket on the big water pipe as I suspected. You cant really see it because it's under that rubber hose. At any rate I'll take a pic and throw it on here later just incase someone else needs it, just cause it's hard to see. I got it out of a junkyard and didn't take it apart. That's why I wasn't sure where to bolt it! Thanks so much.
 
Heres how I have it mocked up, not sure if the tip is bent out of shape but heres how it bolts!
 

Attachments

  • 15889443159024270372096070257819.jpg
    15889443159024270372096070257819.jpg
    757.5 KB · Views: 102
  • 1588944361651627439714402012129.jpg
    1588944361651627439714402012129.jpg
    1,009 KB · Views: 121
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top