The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support RTM Racing
Please Support Rix Racing

2G 3D printed gauge pod bezel

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Sjd6795

Proven Member
614
121
May 14, 2014
Wilsonville, Oregon
Working on printing a radio din gauge pod bezel. I need to make it slight larger so thinking about making it taller and adding a 3rd staggered hole in it. 0 o 0 kind of look. It will be black when I am done I have several colors red is just my test color.
 

Attachments

  • 20200316_191204.jpg
    20200316_191204.jpg
    884.3 KB · Views: 375
Nice! Looking forward too seeing your end result
I have a new design that works a little better. At least I think that it will. As soon as my Tan factory A pillar trim comes in from Steve at Millerimports I will be relocating my gauges to the radio pod and I will post some pictures.
 
Third and final test piece is printing now this is designed to cover the radio din completely. There is a edge that it will basically rest on preventing it from falling into the console. I will be making different mounting tabs that can be screwed to it to secure it in place that way I can mount it however I like. I will figure out the best way to secure it when it's done. It has a very thick 4 top and bottom layers with 10% infill in the center, the outside perimeter is 6 lines thick. It's still light weight and is not going to break easy.
You must be logged in to view this image or video.
 
Nice! Looking forward too seeing your end result
So I basically have the end result, it fits the space nicely and is actually a press fit. It cannot fall into the opening and it snaps in even though that was not the plan, I will still be designing some tabs to secure it with screws or Velcro. My next step is to pick the color that I want and possibly add text like the above photo.

You must be logged in to view this image or video.
 
If this helps any. 1 DIN fits (3)2 1/16” gauges. Right, but it fits.
Double din fits 5, should be able to pull off 6, but I think most do 5 (3 top, 2 bottom or vice versa).

One thing I appreciate and I know others do is some kind of angle to the gauges favoring the driver.
 
If this helps any. 1 DIN fits (3)2 1/16” gauges. Right, but it fits.
Double din fits 5, should be able to pull off 6, but I think most do 5 (3 top, 2 bottom or vice versa).

One thing I appreciate and I know others do is some kind of angle to the gauges favoring the driver.

I don't have any reason for 5 gauges that's just way to many it would look way to cluttered. I like the simple 3 look O O O, I have a couple others that I printed that do have an angle towards the driver seat but I didn't like them when I test fitted it.
 
Ignore the Narrowband LOL, it came with the car. I am not even going to bother hooking it up, it's just there for a place holder until I can get a wideband.
I think I will revise this design before I do the final print in black. But the viewing angle is perfect from the driver seat. My shift knob and cigarette plug is also 3D printed :D
You must be logged in to view this image or video.
You must be logged in to view this image or video.
 
Should make a version that allows for the radio to be installed with 3 gauges sitting under it.

If I had a radio in the car I would've done that. Off the top of my head I don't know measurements to make it flush with a radio. I still plan to make a few different versions so I might make one that can snap together to support radio or no radio.

Here is the final one I have in my car, I do plan to angle it towards the driver though. v2 coming soon.
You must be logged in to view this image or video.
 
Should make a version that allows for the radio to be installed with 3 gauges sitting under it.
There's a member on here that used to make this exact setup, I stumbled across one of his old posts a few days ago and reached out via email. He's currently checking to see if he still has the mold so I can buy one from him. It replaces the entire radio/HVAC surround that clips in and also has the gauges angled towards the driver.
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top