The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support Fuel Injector Clinic
Please Support Rix Racing

Drag Race Build My 2g dsm second build, this ones going smoother

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

well i have everything i need to get the flash running!!!! ive been hustling on getting it running this week!!!!!

what i have done since my last post

-i hooked up fuel system with a bunch of an fittings
-i did the shift kit in the valve body-still need to put in trans
-got my driver side metal motor mount in innovate- im using steel rather then aluminum so i can weld a bracket to it for my mechanical fuel pump later
-i bought a cheap battery
-installed timing belt and did the timing
-installed kiggly oil pressure regulator in the head
-primed oil system- used a drill on the oil pump to flow oil through the motor, did this before installing the timing belt
-installed stock 450cc injectors

ill make a video update tomorrow after i get off of work

things left to do

-install knock sensor
-install exhaust manifold
-install intake manifold
-plug back in my engine harness
-plug in ecu with dsm link v3 full
-install throttle body
-install speed density sensors
-install o2 sensor
-install iacv
-add coolant
and maybe ready to start!!!!

IMG_4159.jpg
IMG_4160.jpg
IMG_4161.jpg
 
did a few things since the last video!!!

- welded -10an fittings to valve cover
- bought used top mount t4 manifold and turned flange to fit my big a*s turbo
- bought venom intake manifold (still working on cracks and powder coating)
- powder coated valve cover and turbo snail!

60566973627__2DD3D272-8748-42F2-A8A2-E5F083153ECC.JPG
IMG_4579.jpg
IMG_4575.jpg
IMG_4576.jpg
IMG_4577.jpg
IMG_4578.jpg
 
Side exit exhaust?
yes sir LOL its going to be a 4inch exhaust pip coming out of the passenger side front bumper. i still have a few thing to mount and mock up before the pipe can be made and put on. i have to install my engine cross brace underneath, and make a mount for the rad, basically i have to put on a few things still before the pip can be put on. :D
 
fic 2150cc injectors, a current member point them out for sale on ecmlink fourms
10an baffeled catch can, ebay
new aem wideband sensor, wagner part number 250-25036. this sensor works for aem LSU 4.9 sensor, i got it from rock auto for $65 +tax

all these goodies showed up today fellas!!

IMG_4634.jpg
IMG_4635.jpg
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top