The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support Kiggly Racing
Please Support Rix Racing

Adriana's Xona Rotor 1G

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

C’mon we’re dying to know what’s the new set up? You threw a rod at WCF, on a run you had IN THE BAG. We know you’ve got something in the works, the car is getting faster and faster, give us something LOL
 
Hey y’all! Been busy at TX2K with Brooke and finally had a second to check in.

As of right now some updates include:
• Boostin Performance Red Demon spec block (not billet)
• Haltech Elite 2500
• Haltech ic7 dash
• Haltech engine harness
• Building our own chassis harness
• Carbonetics fiberglass front end, doors, hatch, carbon wing
• 2 gallon cell up front (had a 7 gal in stock location previously)
• Stepped up to 8” wide wheels over the 7” we ran before
• Magnus Motorsports intake manifold
• 8 FIC 1650s
• Kiggly Racing billet basket
• optic armor windows for Carbonetics doors & hatch
• Vibrant Performance HD clamps, fittings, hose
• Methanol

I’m running on minimal sleep and minimal food so that’s all I can think of off the top of my head right now.
 
1EB06276-AB60-4DE1-AC4A-5C9E6603451F.jpeg
C5273D3C-0F19-4DE4-ADEF-01ADB5DF4C95.jpeg
5142601D-C13D-4FD6-910D-7B19859711CA.jpeg
C5273D3C-0F19-4DE4-ADEF-01ADB5DF4C95.jpeg
1EB06276-AB60-4DE1-AC4A-5C9E6603451F.jpeg
9BDEF8A2-4D20-4730-946F-15297D233271.jpeg
42739551-A323-4970-9438-00345DFB9EC9.jpeg
27EDE399-A137-46E3-B6CB-957135901953.jpeg
15B01DB0-0EC2-47BF-9DBB-D0C64EE71D68.jpeg
5EAAB97E-E0FE-4A9A-92ED-D1BA97C8E36B.jpeg
485B17EB-7AEF-4337-A555-407BB9E0A2A1.jpeg
047FDA3B-1311-4347-A2D5-EB3C700A367D.jpeg
047FDA3B-1311-4347-A2D5-EB3C700A367D.jpeg
1EB06276-AB60-4DE1-AC4A-5C9E6603451F.jpeg
047FDA3B-1311-4347-A2D5-EB3C700A367D.jpeg
1EB06276-AB60-4DE1-AC4A-5C9E6603451F.jpeg
047FDA3B-1311-4347-A2D5-EB3C700A367D.jpeg
1EB06276-AB60-4DE1-AC4A-5C9E6603451F.jpeg
 
That looks gorgeous and somewhat familiar except for those cheap rods and pistons......JK.
Awesome update, thanks Adrianna!
Keep on using that right foot!!!
 
Just saw your episode of fastest car on Netflix! Sweet ride, but I'm pretty sure now your 2x faster then when that was shot. Good luck with the build!
 
3fa721ea-bee6-4a36-b05f-12298d569157

Painted the underside last weekend. Heading to the shop in the AM to replace the rear subframe bushings, strip it, paint it, swap in my new volk arms & install the subframe! Sorry I’m not the best at updating here. I do a lot of “BTS” stuff in real time on my Instagram: thatjdmgirl

upload_2020-4-10_22-2-54.jpeg
 
Hey! So we found out the rear u-joint was shot and ordered a recall kit and got it replaced. We also spent 3 days getting the interior in order and am extremely happy with it! it'll be a while til it's completely wrapped up, as that wont happen til the car is ready to run.

Interior:

U-Joint:
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top