The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support ExtremePSI
Please Support Morrison Fabrication

2G Hx40 oil feed fitting

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Koda

Proven Member
72
8
Jun 2, 2019
Butler, Pennsylvania
So I have a -4an oil feed line , I just need a link to the right fitting to go from a -4an into the holset feed, I have one currently and it’s the right size just wrong thread pitch and I cant find the thread pitch anywhere, even on holset’s website.
 

Attachments

  • image.jpg
    image.jpg
    2.4 MB · Views: 127
The silver threads on the left are the right size , the bronze one on the right has the right -4an fitting and the same outer diameter on it but just wrong thread pitch
 
Its a super nice set up for Holsets. Anytime @Koda :thumb:
 
12mm x 1.5 4AN "flanged" adapter is what you need. Use an o-ring to seal at the top of the threads just as Holset intended and it'll never leak. Restrict to around .100" (3AN I.D.) and run a drain the size of a fire hose and it will never let you down.
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top