The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support STM Tuned
Please Support Fuel Injector Clinic

Okc?

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Not that I am aware of. We had one come in a few years back, but the establishment seems to have changed ownership at some point and now appears to be permanently closed.
 
What shop in T town claims to be a DSM shop Cody?
Brian pretty much knows the OKC vacinity but I am north of Tulsa and don't know of a DSM specific shop.
Please share. I'm curious.
 
Ap racing. Works on them but he mostly does evos I think he uses Hubble's dyno.

He uses humbles dyno. And in okc there is Darren Thomas racing.
 
AWD dyno by chance??? If he does EVO's then must be. Where is their location, do you have any more info? Love to dyno my car sometime!
 
AP Racing's website shows where they trailer the car down to Houston to do their 1300whp dyno pull. And I don't see anything on Darren Thomas's site to suggest he offers AWD dyno services, either.

In either case, it never hurts to contact them to find out. Now, digging around since I was -->| |<-- close to posting I was fairly certain there are no AWD dynos in the state, you might check out Ready Motorsports in Mannford. The setup doesn't appear to be super sophisticated but it appears they may just have one.

I'm still here. As most can relate, life's been in the way for the past few years so I'm less involved than in the past.
 
That video is way old like I said he uses humble perfomance dyno it is in tulsa. And yes there are about 5 awd dynos in oklahoma the gtr shops are everywhere. And I'm guessing Darren has access to one to.
 
Look, I'm not getting into a pissing match with you. I don't find information about any AWD dynos in the state except for perhaps that one I mentioned in my last post. That's all I'm saying.

Again, if anyone is truly interested, I would recommend calling whatever prospective company to verify it is actually a service they offer.
 
Not a pissing match bud I've been to 2 different ones myself for dyno days. SPD in edmond and there is a place in moore I've been to but dont remember a name a simple google search saying awd dynos in oklahoma brings up several.
 
RIP Tuning was in Moore and had an AWD dyno, but they exchanged ownership, and permanently closed somewhere around February 2015. That was the last local one I had heard anything about.

Simple Google searches bring up dynos, sure, but if you dig a little deeper into them, none of them specifically state they are for AWD and trying to find media evidence of an AWD car on any of their dynos is proving to be more than what it should be.

I've never been to SBD in Edmond myself. The only picture they have on their website of a car on a dyno happens to be a Subaru BRZ (RWD) -- though it does look like the dyno itself is for an AWD and a slew of historical posts from 5+ years ago show that they used to be located in Moore and had an AWD dyno there. Good possibility they have one in Edmond now, but I'd still recommend anyone interested call to verify.

AP Racing's video was from December 2018, really not that long ago. On top of that, Humble Performance focuses mainly on Honda and Acura builds. A video posted by them on Youtube in October 2019 shows a converted AWD Honda having the driveshaft removed to be dyno'd at their shop.

This is simply a quick summary of my research. I'm likely never to need one so maybe I'm not looking as hard as everyone else.
 
Last edited by a moderator:
.:hmm::hmm::hmm:
There is always a FIRST. Maybe I can help.
 
Hello everyone. I just picked up a 98 GSX project from Kyle Schram in Wisconsin and am working to get it assembled. Dropped it off with Andy at 1-up Fabrication in Tuttle. Once that’s complete it will head to RB Customs to fit the carbon fiber parts and paint. Excited about this build, but it will take some time so follow my progress on IG @scram_gsx. Thanks!
 
My old lady said she saw a super nice white 2G Talon running around the metro earlier this week. I thought it must have been you, Paul. Guess that answers that...
 
I'd like to get any one of my 3 road worthy enough to come and see you guys!
I was down there about 4 yrs ago and saw a lot of guys go to Mexico to race on the freeway. It got so late, I fell asleep in the carROFL
 
My old lady said she saw a super nice white 2G Talon running around the metro earlier this week. I thought it must have been you, Paul. Guess that answers that...
You two get over here and help me fix this thing!!!

On a more serious note Brian what did you do with that wavetrac?
 
If I could stop going around in circles with mine, I'd be over in no time!

Paul, I still have the Wavetrac, sitting in the same transmission we took apart back when, waiting on a rainy day or a day I feel excessively poor. So far, the 96 continues to sit in storage as well and I've got plenty of parts for it. But that's what it's intended to go in.
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top