OH91awd
10+ Year Contributor
- 1,204
- 763
- Sep 22, 2011
-
chillicothe,
Ohio
looking for some ideas on how to go about mounting the window net on my car since it will have swindout door bars.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
thanks a lot tim definetly gives me an idea. i know im going to need to have a custom net made. biggest thing is i cant find much info on if a certain amount of area has to be covered with the net.I responded to your ECMLink thread,
Same as other forum -
That is a tough one with a swing-out. You may have to integrate something into the A-pillar bar at upper and lower points to have as a pivot or clip-in then have a couple sleeves on the bar and halo area to mount into. Here is mine for example; as you can see, I have a fixed door bar, with a mounted pivot on the door bar, and a cable mounted pivot at the lower front. I have a sleeve at the upper halo point and a manual clip-in at the A-pillar.
See pictures in this link:
https://www.facebook.com/tim.zimmer.35/media_set?set=a.10216656151221970&type=3&uploaded=36