The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support ExtremePSI
Please Support STM Tuned

30-2301 Wiring help

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

CT DSM 06114

15+ Year Contributor
39
0
May 26, 2004
Hartford, Connecticut
Good day Tuners. I need your help in figuring this out.


After about 5yrs now, i am extremely tired of my Innovative WB. I constantly have to wait for it to give me a good steady signal before driving out. Even after a long drive. Going back to my AEM WB controller. Never had that problem before.


So the help i need, is to see if anyone is currently running the old school AEM WB Controller 30-2301. I grabbed what i had in my storage bin, and noticed its not complete. Most of it is there. Also found a EUGO harness. I figured out i have from the controller to the sensor. I don’t have the power harness to the controller. It’s a 6pin harness, but only 5 being used. I have to make a power harness to plug in. Pics below.


Thank you.
 

Attachments

  • 47EFF137-463D-421E-8205-3DAB638E8309.jpeg
    47EFF137-463D-421E-8205-3DAB638E8309.jpeg
    983.3 KB · Views: 71
  • 30112E97-73FB-43E9-87A2-D21BF456ECBF.jpeg
    30112E97-73FB-43E9-87A2-D21BF456ECBF.jpeg
    813.8 KB · Views: 61
  • 8C48E51C-829C-4C29-B66A-A897B777A2C0.jpeg
    8C48E51C-829C-4C29-B66A-A897B777A2C0.jpeg
    1.5 MB · Views: 73
  • E150CDE9-F660-486A-BBFE-1E811DBA07DC.jpeg
    E150CDE9-F660-486A-BBFE-1E811DBA07DC.jpeg
    1.5 MB · Views: 76
  • DD332E17-78E8-40A4-A5F2-04850A5E1A5B.png
    DD332E17-78E8-40A4-A5F2-04850A5E1A5B.png
    112.5 KB · Views: 82
  • 422CA699-E429-4D0D-9A6A-1E110A984AB0.png
    422CA699-E429-4D0D-9A6A-1E110A984AB0.png
    493.9 KB · Views: 70
I'm running one but what's your question? Your post is a bunch of quick statements.
 
Last edited:
Hey sorry just wanted to say I had the similar experience with my 2g and innovate wb. I fixed the issue by running a relay off the power signal the ECU gets which doesn't lose power during crank. So by the time you turn the key and get the car cranking the wb is already going through its warmup and ready to respond. I'm not trying to persuade you either way just my two cents on how I made it work flawlessly for me. Thank you for your time, Jason Penny
 
I'm running one but what's your question? Your post is a bunch of quick statements.

Apologies if i was not clear.

I do not have the power harness to WB controller. I am to make my own.
I need to know the what pins on the WB controller plug meets on the power harness.

On the controller plug;
Red-
Black-
Blank-
Orange-
White-
Brown or Green-

Picture above.
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top