Is there a piping kit that needs little tweaking to work on an auto 1G?

Punishment Racing came up in the searches but it looks like they're maybe gone???

2.5" is plenty, even a universal kit that can be pieced together is cool. Any tips or suggestions are welcome. I could do a custom but having even 50% of a kit would be nice.

Thanks

we ended up building my cold side piping from scratch to clear the shifter cables for the auto.

The ETS core is VERY similar to the VRSF core. Not much to the piping for it. You need a TB Elbow, a BOV pipe and 1 straight pipe for the intake side of the intercooler (drivers side). The rest are silicone couplers, either 90* or 45*. I shot a couple pics of my VRSF setup since I drove the car to work today.
Take a look, as any questions that you need!
Assuming you have the intercooler core, you need the following:
1 TB Elbow
1 BOV flanged charge pipe
1 Intake charge pipe
2 90* couplers
2 45* couplers
8 T-bolt clamps

Also:
https://www.dsmtuners.com/threads/archer-fab-2g-short-route-intercooler-piping-kit.506587/
Kyle can fix up a tubing kit, if you need details, PM him!

Are those 45 degree couplers between the throttle elbow and intercooler? didn't think that angle would work, but might have to try and figure out something myself this winter.

Yes they are. Came straight out of the VRSF box. It is pretty easy to fab, the BOV flange and the TB Elbow are the only "special" pcs.

No Archer Fab for 1G, looked great for 2G but maybe they'll be enough demand to change his mind. I'll hold off and hopefully something will show up but the VRSF and customization might be the next best thing.