The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support ExtremePSI
Please Support Morrison Fabrication

Daily Driver

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Sold the Borg Warner EFR 7163 Turbo.
Bought Tactrix Openport 2.0 Cable.
Bought GPlus Silicone Hose Kit.
Bought slotted rotors and new brakes.
Bought a custom 250amp alternator from Brand X Electrical for car audio.
Bought FIC 950cc Injectors (Need tested still)
Bought AEM FPR.
Bought 255 LPH fuel pump.
Bought metal intake.
 
I am working on getting a Wideband O2 Sensor to work well with Tactrix.
I am attempting to tune it within the next 2 weeks or so.
I need to buy CeddyMods and EVOScan.
I need to buy Oil Catch Can.
I need a wideband o2 sensor setup that works with EVOScan
I bought a short-throw shifter.
I am attempting to change transmission out since it grinds bad in second gear.
 
Last edited:
Long time no update.
Blew the Trans/Clutch to a crisp.
Leaky Valve in Cylinder 4.
Decided to rebuild from here.
Sold old FIX 950cc injectors after sending to FIC.
Sold old 255LPH Fuel Pump.
Sold old Metal Intake
Got an Aeromotive FPR.

Car is currently got the engine bay completely repainted.
Brand new shifting bushings and shifter base bushings.
Went from an Ebay short throw back to stock shifter as I didn't like it.
Got an AEM Truboost Gauge, AEM 10bar Oil Pressure Gauge, and an Innovative Widebands gauge. Going into a triple pillar from glowshift.
Got a walbro 450 High Pressure Fuel pump.
Got a Fuel Labs Fuel filter w/ upgraded stock lines for E85.
Got bulkhead fitting since my old fuel hanger lines kinked.
Bought an Built engine.
Wisco 10.0:1 E85 HD Pistons
Manley H-Beam Rods.
ARP Main and Rod bolts.
BC springs/retainers.
Had STOCK cams, but i replaced them with genuine HKS 272/272 cams from a 1g (Had to drill into cams to fit 2g sensor onto it)
Timing redone with oem parts and kevlar timing belt (This was pain for me to figure out even with engine out of the car. BUT I GOT IT!)
Got an FP Intake w/ the 9" filter.
Got a custom catch can with -10an fittings on my VC and catch can.
Got a 1g TB and going to port my 2g Intake Manifold for it.
Got a Borg Warner S256 turbo with a HAFE manifold and Tial 38mm Wastegate.
Got FIC 1650cc injectors.
Got an EVO 8 ecu w/ a plug and play harness I'll be using for my engine management.
Got an ACT 2600 6-puck sprung clutch kit w/ an ACT streetlite flywheel.
New fork and that fun stuff.
Got new spark plug wires.
Got prothane motor mount inserts.
Got a MAC 3 port electronic boost controller.
Got a fluidampr damper.
Got TEIN Master Control Coil overs.
Got all new front suspension.

Will be needed to get subframe bushings and replace the back control stuff.
Eventually want to get the car all prothane bushings, but for now, I just want to get it to run.
Making some serious progress on it all too.

Also, got brand new tires before she went down for the count about a year and a half ago now.
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top