The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support Kiggly Racing
Please Support ExtremePSI

1G Talon front turn signals not working

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Joshua Tadich

Proven Member
56
18
Jul 15, 2018
Pittsburgh, Pennsylvania
So my front signals on both side are not working. Figured it was a bulb so I bought new ones and plugged them in. Without the headlights on they dont light up at all. Turn on the headlights and they stay on but dont blink. Checked the fuse and its was good but replaced it anyway. The tears work just fine just blink fast. Put on the hazards and they blink at a normal speed but the fronts just stay illuminated. They dont work at all unless the headlights are on. Any ideas?
 
Looks like the wires themselves have power, i swapped connectors and still nothing. I'm thinking the connector in the picture is somehow the problem. I can read power by probing the back of the connector but nothing from the front. Gona have to pull the pins and see what's going on.
You must be logged in to view this image or video.
 
Check all fuses in bay, wiring, and the turn signal relay, grounds too, possible the issue could be the turn signal switch on the steering column.
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top