I’m selling 1998 eclipse GSX that is unfinished but is about 85% done to completion since I’ve owned it for 6 years been sitting in my garage being worked on from Time to time. I got 4K stuck into the motor, TRE team RIP 2.0 transmission, payed 2500 for the shell, plenty of other goodies I can mention to any buyer that could be interested. Just don’t have time to finish it because I got other project cars. The person I rent from is selling the house so kinda forced to move soon and what to get a head start on moving this car. I basically asking for 4K firm as is and in be more then willing to send pictures or answer any questions as need. It may be easier if people choose to text me at 715-310-3188, pictures and texting etc. so this is my update I got in the motor. Eagle rods, weisco pistons, acl rod and crank bearings, balance shafts eliminated, bored over 20%,I polished the oil galleys as seen in the picture, new oem water pump, new oem front case, evo 3 oil pump, Manley intake and exhaust valves, kiggly racing beehive springs, 3g oil lifters, AEM cam gears, ARP head studs, crank and rod bearing, cam gear bolts, punishment racing intercooler, 1g throttle body rebuilt, 1g oil cooler, new oem belt tensioner, new idler pulley, new oem timing belt, brass freeze plugs, exedy clutch, fidanza flywheel And tons I know I’m forgetting. Things that need to be finished that I know are transfer case needs to be put on, I have new oem bolts for it, front cv axels need to be put in, I have a Megan racing 3” downpipe, some brand of car back exhaust that needs to be put on, yes I have the interior door panel and trim, radio that are missing in the photos, it will need all fuilds, oil, transmission, radiator, transfer case, I have the stock radiator and will be throwing in new red mishimoto hoses, I have the hood and front bumper are same colors as the car, I have a brand new punishment racing intercooler and pipes in the box yet, front right fender needs to be bolted on, same for from rocker trim cap needs to be put on. For the things besides a battery, plugs, front fender liners, front driver engine splash guards are the thing I do not have and have been trying to find for the turbo eclipse. I have the intake pipe and a filter also. It has a fuel new walbro pump and been rewired to the battery .This project will need a dsm guy to be finished without a doubt. I will be throwing in 10mm new Magnecore plug wires which can be seen in the windshield in the photos, I will be giving u as much stuff I can to complete the project, I hope u understand that whoever the buyer is will have need less then a 1k to finish the car I’m thinking but that’s me because I like to spend money then to just cut corners on certain things. Just an FYI I’m pretty firm on the 4K price I know what I have into the car. My loss could be your gain in u have the means to finish it. This is my second one I own right now, my intent was to make this one my daily driver and use my other one for being the bad boy 10 seconds car

hotsause64 said:

I’m selling 1998 eclipse GSX that is unfinished but is about 85% done to completion since I’ve owned it for 6 years been sitting in my garage being worked on from Time to time. I got 4K stuck into the motor, team RIP 2.0 transmission, payed 2500 for the shell, plenty of other goodies I can mention to any buyer that could be interested. Just don’t have time to finish it because I got other project cars. The person I rent from is selling the house so kinda forced to move soon and what to get a head start on moving this car. I basically asking for 4K as is and in be more then willing to send pictures or answer any questions as need. I also plan on updating this post in the near future. Kinda rushing at the moment because I got to go to work, it may be easier if people choose to text me at 715-310-3188, pictures and texting etc. so this is my update I got in the motor. Eagle rods, weisco pistons, acl rod and crank bearing, balance shafts eliminated, bored over 20%, new oem water pump, new oem front case, evo 3 oil pump, Manley intake and exhaust valves, kiggly racing beehive springs, 3g oil lifters, AEM cam gears, ARP head studs, crank and rod bearing, cam gear bolts, punishment racing intercooler, 1g throttle body rebuilt, 1g oil cooler, new oem belt tensioner, new idler pulley, olnew oem timing belt, brass freeze plugs, exedy clutch, fidanza flywheel And tons I know I’m forgetting

Click to expand...

Ye

Bump

Still available

Still available my friends

SOLD!!! Thanks to the buyer and thanks to all that were interested.