The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support ExtremePSI
Please Support Morrison Fabrication

1G Need help with v3 ecmlink logging cable.

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Stevestalon

Probationary Member
21
6
Sep 7, 2019
Saint Petersburg, Florida
I have purchased the ecmlink v3 logging cable and cant seem to get it to connect with tunerpro.
I have made sure the ports were correct on the software and correct on the laptop.
I have downloaded the stock 1g adx file from the tunerpro website, opened it in the software and try to start datascan or connect to ecu it just says DA: connecting and never connects. I'm starting to think its my diag port on my car its self. Am i missing something here?
thanks
 
I believe the ECMlink v3 cable will only connect with the ECMlink program, given that you have an ECMlink chipped ecu.

Quote taken from ECMTuning website: "You can not reprogram your factory EPROM chip with this cable. You can not use this cable with a variety of other software packages."
 
Huh, then I don't know. I read that the ECMlink tuning cable was basically like the "key" to accessing an ecmlink ecu. The ecu could not be used without the cable, and the cable could not be used without the ecu. Hope someone else here can help you.
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top