I have had my car apart for almost 9 years and I’m to the point I can get it running again with needed help from awesome members like you guys . So here it goes I’m gonna swap to auto but I don’t wanna hassle my self with swaping the at harness. I did buy a 1g doner car that is auto with 3g shifter in it with a force four shift box . I was wantting to buy the new force 4 shift box 100.1 and hard wire it in. I’m sure there is a guide out here in the forums I’ve done some looking with zero luck so far . Any help would be awesome no just to be clear I don’t wanna use factory tcu at all just force 4 box

thanks for
Your time
Tyler

There is a link somewhere because I hard wired the 3g shifter with the shift box. I as well am not running a TCU. Let me see if I can find it.

Thanks please do .

https://www.dsmtuners.com/threads/3g-shifter-in-2g.500407/

Did you read this write up?

I followed his instruction along with force four wiring instructions. I got it done i can send you a video of it working flawlessly.

1g, smart 100.1, auto swapped, no tcu...same setup I'm running in my car. There are a few other videos on my channel also.

I stated this is in a 1 g dsm none of these have wiring labels or show anything
Useful for my auto swap 1g with out any auto wiring harness at all. My car is manual

http://w4a33.com/doku.php?id=wiring

That should answer your wiring questions on the shift box. As far as the 5spd harness, not exactly sure what, but something needs to be grounded. Neutral switch, parking I don't know. But there is several threads.