The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support Morrison Fabrications
Please Support ExtremePSI

2G Crank bolt washer install

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

my98gsx

Supporting VIP
797
290
Aug 14, 2005
Wappingers, New_York
I cannot believe I was unable to find a thread on this, but here we go... When installing the center crank pulley bolt (which comes with a tapered washer) - does the taper face inwards towards the crank, or outwards towards the pulley?

Sorry for the quick question but I cannot find any information on this.
 
The "bulge" sticks out at the bolt, with the center (inside) being just a tad taller than the circumference (outside).
 
This is not an answer, but might provide a hint
You must be logged in to view this image or video.


Based on that information, I would say the cone should point out (or towards the underside of the bolt head). Just like Marty described. Its a belleville washer if I understand your original question. - I do not understand your latest post. "this" what? draw a line on your screenshot to give me a hint at what you are talking about?
 
I don't think the bolt & washer in the picture is the correct part. Looks wrong to me.
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top