The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support STM Tuned
Please Support STM Tuned

Link G4 Aftermarket Knock sensors Link G4

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

lglracer

Supporting VIP
318
61
Jul 13, 2008
Sacramento, California
I have a Link G4 and wanted to run a donut style knock sensor. Has anyone been able to find or use a kit that works? I'm not logging knock right now but would like to.
 
I grabbed a donut (Bosch) wideband style from a yard, depending on what ecu you are running though, I will warn you that some require modification to log knock as from the factory they are not capable.
 
I'm running a Link G4 and I can modify all that.
What I'm getting at is that the actual circuit board in most of them need a jumper wire added to them to be able to read the knock sensor unless you buy the Link brand of knock setup!
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top