The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support JNZ Tuning
Please Support ExtremePSI

2G Fuel Filter Connector?

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Pedro S

Probationary Member
7
0
Aug 20, 2019
Denver, Colorado
Last finishinh touches on my car and she will be runnung better then ever but i jusy cant seem to find where this connector goes hooked up to can someone help me with some advice olease!?
 

Attachments

  • 15664266442331430318898.jpg
    15664266442331430318898.jpg
    1.4 MB · Views: 35
I don't recognize that plug. By fuel filter connector do you mean it's going to the sensor there on your filter? Because that's an aftermarket pressure sensor to run a gauge or for datalogging.
 
No it doesn't need to be connected to run. There is not a sensor on the filter from the factory.
But if you have an aftermarket FPR on the car you are gonna need something to read fuel pressure to adjust it properly.
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top