The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support Rix Racing
Please Support STM Tuned

2G Fluidampr pulley bolts

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

I went and got some grade 8s from Fastenal with lock washers, been perfect since install and I've had to remove it a couple times. I used blue loctite on mine for insurance.i can't recall the length I got, I want to say 15mm?
 
I went and got some grade 8s from Fastenal with lock washers, been perfect since install and I've had to remove it a couple times. I used blue loctite on mine for insurance.i can't recall the length I got, I want to say 15mm?

That’s perfect thank you both for the fast response. My local hardware store carries grade 8 so I’ll be sure to get them so at least I have some high quality bolts. Anything I should know going into this? I know I may possibly have to lower the engine slightly if I don’t have clearance to get a bolt.
 
If it's a new unit, the thickness has been addressed. The last two new units I purchased, the OE hardware was plenty long enough.

If used, I would measure the thickness of the base to see which version you have (10mm or 17mm).

I’ll check that and get back, I bought this brand new in box off of someone so I couldn’t say I know which one I have. But I will check
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top