Alex_4g63t
Probationary Member
- 1
- 0
- Jan 27, 2014
-
San Antonio,
Texas
Is There Any Dsms In San Antonio ?
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
hey whats up man I'm coming up from El Paso Texas and I have a 1997 gsx spyde 2.4 upgrade. let's go find some other Dsmr'Sand create something new over there. you dumb brother because I'll tell you what I'm down to create a brand new scene down?
Just bought a GSX looking for other dsm
Sw side of San Antonio with a 97 GsT
Damn thats a busy project for sure especially if you're gonna sand by hand. Lmk if i can help around my work schedule i will. Have you ever looked into just doing a wrap job?
Hey man what's up. And oh like hell . I haven't updated in a while but I had been having so many issues and finally got them all figured out then bam idle issues after I replaced my plugs and wires. Thought it was my TPS then my IAC but found out it was actually my ecu that had a burned ground. So I swapped out ECUs and it's fine. But then my timing is off I'm actually gonna be off all next week if you wanna come check out and help. I got my tensioner tool in the mail yesterday so that's all I needed. Hopefully that's the problem and it fixes. But I think I have a boost leak somewhere. As when I floor it on the throttle it takes awhile to go . I'm at 1604 and 90 if anyway yall want to wrench. Mines a huge project going on .Hey brother hows the GSX treating you?
Hey man what's up. And oh like hell . I haven't updated in a while but I had been having so many issues and finally got them all figured out then bam idle issues after I replaced my plugs and wires. Thought it was my TPS then my IAC but found out it was actually my ecu that had a burned ground. So I swapped out ECUs and it's fine. But then my timing is off I'm actually gonna be off all next week if you wanna come check out and help. I got my tensioner tool in the mail yesterday so that's all I needed. Hopefully that's the problem and it fixes. But I think I have a boost leak somewhere. As when I floor it on the throttle it takes awhile to go . I'm at 1604 and 90 if anyway yall want to wrench. Mines a huge project going on .