okay so i had this eclipse for 3 years now and it has been a bloody headache to deal with when i got it the engine wasnt wired up the tranny was cracked where the slave sat so i couldnt attach a new one so after fixing all that i got crank crank crank crank nope never starts so after lots of testing i came to the conclusion the ecu failed and i was right new one in and started right up so a month into driving it the engine seized so now its a year later got a new one and guess what the same exact issue as before no start so again i do all the tests to rule out any sensors or other electrical issues now im back to square one with this piece of shit so my question is does anyone know what on the ecu circuit goes bad to cause this i now have two ecus with the same issues they dont send signals to produce spark i want to know if maybe there are crappy resistors or capacitors in the ecus that cause this kind of issue and what is a TRUSTED place to get a good aftermarket ecu that wont fail after a month of use i really doint get how it died the engine seized and after that it sat not being used for a year now all of a sudden it doesnt work also its a 99 eclipse with a 420a crysler engine and ecu 5 speed manual any help on this matter would be nice its really annoying