The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support STM Tuned
Please Support Morrison Fabrication

Resolved Identifying CAS wires for 1G to 2G wiring

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Simonsaysr1

Proven Member
135
11
Jan 30, 2016
Rocky mount, North_Carolina
I have the cam angle sensor and crank angle sensor leads stripped to wire into my 1g cas . My stupid self didn't mark which was what and I have two sets of wires. I have pictures. I tried referencing some diagrams but the colors don't seem to match. Car has a 95 wiring harness
 

Attachments

  • IMG_20190701_231941430.jpg
    IMG_20190701_231941430.jpg
    714.3 KB · Views: 88
  • IMG_20190701_231935955.jpg
    IMG_20190701_231935955.jpg
    1.2 MB · Views: 59
crank sensor
pin 1 (black)
pin 2 (blue/white)
pin 3 (red)

You must be logged in to view this image or video.
 
these for sure are not right.

You must be logged in to view this image or video.
 
so you got the AC compressor wires instead of the cam sensor

cam sensor plug is a flat 3 pin, not triangle like the crank sensor plug is
You must be logged in to view this image or video.
 
Last edited:
so you got the AC compressor wires instead of the cam sensor

cam sensor plug is a flat 3 pin, not triangle like the crank sensor plug is
You must be logged in to view this image or video.
Oh shoot. That's where I'm messing up. I feel so stupid. Haha. Got to get this corrected today haha
 
Oh shoot. That's where I'm messing up. I feel so stupid. Haha. Got to get this corrected today haha
i should have been more carefull when taking it out and wrote it down. after doing a bunch of stuff around the engine bay it slipped my mind what they looked like. i shouldnt of assumed that the two position sensors were triangular.:ohdamn:ROFL atleast i wasnt dumb enough to try to wire it with the ac switch. i guess ill cap those leads off, and considering my ac was deleted way before i even purchased the car, i didnt know thats where it came off the harness haha.. learning something new everyday...
 
I wouldn't say you messed up. You just got side tracked when you removed the un-needed plug. :thumb:

did you get it all wired up?

You must be logged in to view this image or video.
 
I wouldn't say you messed up. You just got side tracked when you removed the un-needed plug. :thumb:

did you get it all wired up?

You must be logged in to view this image or video.
I ended up having to run around town after work today. but tomorrow I am going to do it(its at my friends garage still), shouldn't take too long to do though, hopefully I dont cook its been very hot in NC recently(100* and not a cloud in the sky). but I know what i need to do now, I really do appreciate the help from you, I'll take a picture of it redone tomorrow haha
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top