The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support Morrison Fabrications
Please Support STM Tuned

2G 1g cas in a 2g different wires

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Simonsaysr1

Proven Member
135
11
Jan 30, 2016
Rocky mount, North_Carolina
My 1g Cam angle sensor I purchased only has 3 leads instead of 4 coming out of it. Green blk trc, green white trc, green red trc I'm trying to install it on a 95 g6k head. How should I wire this up¿
 
Are you using the 1g cas for the crank and cam signal or just for the cam?
thats what im trying to accomplish, but the RRE shows it with 4 wires on their write up, I can order the correct pigtail , but why does this have three green wires instead of 4 different colored ones. its supposed to be a blacktop 94 Cas, I have a 95 G6k head
 
thats what im trying to accomplish, but the RRE shows it with 4 wires on their write up, I can order the correct pigtail , but why does this have three green wires instead of 4 different colored ones. its supposed to be a blacktop 94 Cas, I have a 95 G6k head
supply both the crank signal and cam signal to the ecu
 
Here's a pic of the wires
 

Attachments

  • IMG_20190629_172048384.jpg
    IMG_20190629_172048384.jpg
    1.2 MB · Views: 124
do you know what kind of other cars would have that pigtail, really dont feel like spending 40$ on a new pigtail , there is a 1g in a 2g swap harnesses for like 80$ but i was hoping to just solder it together and call it a day. wouldnt even know where to get a pin.. i wonder if i can take apart a random pigtail i have laying around and make up a new pin for it, and just go buy RREs diagram they made.
 
For cars, I always just look at any mitz (diamante, galant, plymouth colts late 80's early 90's) around the same era, Hyundai's around the same era, I never remember specifics so I just browse. I feel ya on the 40$ pigtail, thats a bit steep. I thought I had one laying around (old harness) but I guess I already used it on my 1g I sold. If you can find a pin thats the same size it should work.
http://www.roadraceengineering.com/1gcasin2g95-96M2.htm no need to buy the diagram...
 
Oops I meant by not buy, dang phone . But yeah I'ma take apart a few connectors I got laying around. If not go on lunch break Monday to a junkyard
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top