The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support JNZ Tuning
Please Support Morrison Fabrication

Sold Liberty Faceplated trans.

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

bastarddsm

20+ Year Contributor
5,641
1,474
Aug 26, 2003
Mendota, Illinois
Selling my liberty faceplated transmisison. Stock ratios, 91-92 gear set. Low time on it, trans is currently open for inspection, and will be assembled and ready to go when sold. Currently in a 91-94 case, has a welded diff and 23spline output. But I can put in a 22spline output if needed. 4 spider center diff also available. I can install this gearset in a supplied 2g case if needed.

This thing will shift faster than you can move the shifter, even with a garbage non releasing clutch. Helped me run my first 9 second pass.
You must be logged in to view this image or video.
.
Yes, that's a 9.80 @144 with a very mild 1.55 60'.

$1500 with welded diff, or $2700 with a 4 spider + shipping and paypal fees. I will meetup/deliver within 100mi of 61342 or 62615 $200 discount for good core trans.
 
Last edited:
To answer a few questions:
1. This has about 10-15 passes on it and like 500 street miles. I put it in just before the shootout in 2017, ran 4 qualifer passes and 1 elimination pass, went to Hot Rod Drag Week, made like 4 passes and had an engine failure, fixed engine, trailered to last day, made 2 more passes. Day after went to IFO-STL made one qualifer pass at 9.80, and got the boot. I took it out after that. That's all the use it's had. Right now it's apart for inspection, and I sent a few gears to liberty to be crack checked. The trans will be in perfect condition and ready to run when sold.

2. This started off life as a basically new gear set. The gearset came out of a JDM 8g GVR4 that was totaled at 10kkm.

3. Typically it costs close to $1000 to get 1-4 face plated, core transmission $400, plus a days labor to clean it all up, check the shif engagement, and assemble at $300, and then figure in half a day to get it crated up and my $1500 asking price is a deal. When shipping I build a wooden crate inside a 2 layer shipping box. It is guaranteed to get there without damage. It's time consuming, and close to $50 in materials.

4. Typically when you send something to liberty, it will be there for months. This will be ready to go very soon.

So no I'm not going to take much less than my asking price.
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top