dcmc
Probationary Member
- 4
- 0
- Mar 13, 2019
-
Owasso,
Oklahoma
Hey guys, first time poster here. I have tried as hard as I can to do my homework before making this post. My 95 tsi will not start. Here's the order of events:
Thanks
- Car is running and driving, but has fuel pressure issue
- car sits for 3 weeks and battery dies from power draw somewhere
- I install new fuel -8 and -6 fuel lines, and new regulator
- charge car up overnight
- car will not start
- checked CAS by spinning it and checking for spark - All 4 cylinders have spark.
- checked resistor pack on firewall with a multimeter - all resistors metered 7ish ohms.
- checked caps in ECU - all good
- checked 12v to injectors - all injectors have 12v
- grounded injectors to battery - they all will click when briefly grounded
- metered all injectors, 4.7ish ohms on all
- TPS is reading accurately
- changed spark plugs - just to be safe
- put noid lights on injector wires - no light
- installed fuel pressure sensor on regulator - fuel pressure is a consistent 43psi even when cranking
- car has a walbro 450 and fuel pump power upgrade
- car is on speed density
- fuel pressure sensor is on the baro input
- car has link v3
- AEM FPR
- omni 4 bar
- LC1 wideband
- aem fuel rail
- FIC 1220cc low-z injectors
Thanks