88BB8B
Proven Member
- 179
- 18
- Oct 14, 2016
-
Coldstream,
BC_Canada
Hey guys. I've ran into a problem. I just replaced my stockers with my FIC 850cc injectors. Before the install the car was running fairly iffy, but idled smooth and was even able to pull a bit. Since installing the FICs the car has become more difficult to start, especially when warm, and it idles like crap, even runs like crao when I'm holding at about 3000 rpm.
My AFRs are all over the place, dancing around as low as 11:1 and as high as 16:1 or 17:1 both at idle and when revved up.
I definitely am nervious to try to drive it with AFRs jumping around like that so I can't go ahead with tuning until I get the sorted out.
I've got the AEM infinity 506 and have tried smoothing out my target AFRs, ignition timing, and VE in the idle part of the maps.
I'm pretty sure I have my injectors setup properly, I put in the deadtimes and flow numbers that were provided with them and they averaging AFRs right where my target is, its just bouncing up and drown from target all the time. Help me out please.
My AFRs are all over the place, dancing around as low as 11:1 and as high as 16:1 or 17:1 both at idle and when revved up.
I definitely am nervious to try to drive it with AFRs jumping around like that so I can't go ahead with tuning until I get the sorted out.
I've got the AEM infinity 506 and have tried smoothing out my target AFRs, ignition timing, and VE in the idle part of the maps.
I'm pretty sure I have my injectors setup properly, I put in the deadtimes and flow numbers that were provided with them and they averaging AFRs right where my target is, its just bouncing up and drown from target all the time. Help me out please.