jakk220
10+ Year Contributor
- 1,319
- 312
- Nov 13, 2010
-
Akron,
Ohio
So I recently switched to a .70ar housing from the .55ar on my 8 blade 58mm HX-40 and I was wondering what spool times some others are seeing. I have a log attached for review but it seems like I am not getting to full boost (34psi) until 5500rpm or so. I was just wondering if this is normal or if I should start looking for an issue. I fixed a boost leak I had before the log and it does not appear that I have any exhaust leaks. The wastegate has a 15psi spring in it and does not sound like its cracking open early. It just feels a little laggier than I thought it would be. Car is currently on a stock intake manifold and a ported t3 cast exhaust manifold. 9:1 compression pistons and e85 as well.
I have attached a 1-4 with launch as well as a sweeping 3rd gear. AFRS are .3 leaner on link than they actually are and im currently working on getting them adjusted. Thanks for the input.
I have attached a 1-4 with launch as well as a sweeping 3rd gear. AFRS are .3 leaner on link than they actually are and im currently working on getting them adjusted. Thanks for the input.
Attachments
Last edited: