Mitro Z Nzongo
Probationary Member
- 7
- 0
- Jul 18, 2018
-
Stockton,
California
Hi dsmtuners this is my first post so bare with me.
I have 1997 eclipse gst that i been working on as my project car lately, i gone thru motors and etc.
I had a spare motor that i decided to build. I got the block and head worked on at my local shop dynicron in stockton. The head has been machined for a mls head gasket so has the block. The head also had its valve guide replaced, all the valves have been measured and are in spec. Replaced the valve stems with supertech valve stems, and got the block honed. Crankshaft and camshaft bearings where also polished at this shop
+300-500hp Parts list:
Wisceo hd pistons
Manley rods
Kings bearings
Crower 265/265 cams
Stock Crank
Balance shaft delete(bearing installed by shop)
Cometic MLS headgaskit
ARP head studs
Walbro 255
1150FIC
Aem tru time cam gears
New oem gasket,seals, and belts
Now i been trying to find a shop to build my motor and nobody wants to do it with using there parts only. If you know a shop willing to assemble my motor that help(motor is 100% dissembled).
Im asking for help either some one can help me out and come thru and help me build it OR i can pay someone outright to build it for me.
If your intersted send me a private message thank you
I have 1997 eclipse gst that i been working on as my project car lately, i gone thru motors and etc.
I had a spare motor that i decided to build. I got the block and head worked on at my local shop dynicron in stockton. The head has been machined for a mls head gasket so has the block. The head also had its valve guide replaced, all the valves have been measured and are in spec. Replaced the valve stems with supertech valve stems, and got the block honed. Crankshaft and camshaft bearings where also polished at this shop
+300-500hp Parts list:
Wisceo hd pistons
Manley rods
Kings bearings
Crower 265/265 cams
Stock Crank
Balance shaft delete(bearing installed by shop)
Cometic MLS headgaskit
ARP head studs
Walbro 255
1150FIC
Aem tru time cam gears
New oem gasket,seals, and belts
Now i been trying to find a shop to build my motor and nobody wants to do it with using there parts only. If you know a shop willing to assemble my motor that help(motor is 100% dissembled).
Im asking for help either some one can help me out and come thru and help me build it OR i can pay someone outright to build it for me.
If your intersted send me a private message thank you
