Installed vinyl Sparco r100’s in my car in December just forgot to post pics of them so here they are.
I used stock sliders and there isn’t much head room. I’m about 6’1” and my hair just barely touches the ceiling.

Im looking at those, how do you like them? how did they mount? and would you buy cloth if you had to do it over?

Same questions as above, but also, did you happen to weigh them without the sliders before they went in? Thanks!

motomattx said:

Im looking at those, how do you like them? how did they mount? and would you buy cloth if you had to do it over?

Click to expand...

The vinyl is really nice but I haven’t had them in the hot summer with no a/c so i might regret it later. They hold me in super nice compared to the stock seats. They were pretty hard to mount my dad helped me with all of it because I’m not a good fabricator. The seats are way skinnier than the stock sliders. The hardest part of the whole process was making it line up with the steering wheel. The seat is right up against the middle console and still not straight on but I’ve gotten used to it.
I’ll try to post pics of the rails and the position of the seat later.

I have the same seats in cloth - but used the sparco mounts and sliders. With the sparco mounts it puts the seats so far to the outside that your arm hits the doors (badly). Also, if you use their sliders the head room is horrible as you are aware of... I opted to mount the drivers seat with no sliders (since nobody else drives my car) and left the passenger side on the sliders. Nice job using the stock seat mounts though.

I'm 5'2" and like to have the stock seats up vertical all the way, not the slider up all the way, I have 30" waist and looking at the favric ones, wld I have issues if I want to put in a harness in as well?

Jonnychance said:

I'm 5'2" and like to have the stock seats up vertical all the way, not the slider up all the way, I have 30" waist and looking at the favric ones, wld I have issues if I want to put in a harness in as well?

Click to expand...

I Couldn’t tell ya man I have to sit pretty far leaned back and it’s slid as far back as they can go as well. But ur a lot shorter than me so i really don’t know. I don’t have harnesses either

I am thinking about buying these seats. Can you post any more pictures of the install? What did you have to do in order to retain the stock sliders?

Also curious but I’m 6’2 and drive a 1g

Dawson159 said:

Installed vinyl Sparco r100’s in my car in December just forgot to post pics of them so here they are.
I used stock sliders and there isn’t much head room. I’m about 6’1” and my hair just barely touches the ceiling.

Click to expand...

Nice seats! Where'd you get em from?