The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support Rix Racing
Please Support Morrison Fabrication

General 2g 1997-99 Pin for Knock Sensor on ecu?

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

chanley talon

15+ Year Contributor
774
14
Nov 10, 2005
Spencer, Indiana
Can anyone tell me where to locate the pin on the ecu for the knock sensor on a 2g dsm. I am super frustrated.
I keep seeing 95-96 on pin 78. What about 97-99? Does it work different?
 
I am running into an issue where I keep getting three codes. Knock sensor, egr, and o2bank one. The knock sensor is my biggest concern. I have replaced it with two known working ones and the fault code comes right back. I tested the volts on pin 78 and I had.
. 01 of a volt. I think I should see. 04-5? Can anyone help me?
 
Yes, they do, what ecu are you using? if its a 98-99 they rarely go bad, the others have capacitors that leak.
 
Its the same for all years.

You must be logged in to view this image or video.


the dotted lines on the diagram mean that the wire is shielded.
It looks like:
You must be logged in to view this image or video.
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top